Replacing A Front Turn Signal Light Bulb; Replacing A Rear Turn Signal Light Bulb Or The Tail/Brake Light Bulb - Yamaha BWS 2003 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
ZAUM0498
1. Screw
Replacing a front turn signal
light bulb
1. Remove the turn signal light lens by
6
removing the screw.
2. Remove the defective bulb by
pushing it in and turning it
counterclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clockwise
until it stops.
4. Install the lens by installing the screw.
Do not overtighten the screw,
otherwise the lens may break.
1
ZAUM0499
1. Screw (x2)
EAU03497*
Replacing a rear turn signal
light bulb or the tail/brake
light bulb
1. Remove the lens by removing the
screws.
ECA00065
1
ZAUM0500
1. Bulb
EAU00855*
Do not overtighten the screws,
otherwise the lens may break.
6-21
2. Remove the defective bulb by
pushing it in and turning it
counterclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it
clockwise until it stops.
4. Install the lens by installing the
screws.
1
EC000108