Toshiba Carrier BMS-SM1280HTLUL Service Manual page 41

Smart manager / central remote control
Hide thumbs Also See for Carrier BMS-SM1280HTLUL:
Table of Contents

Advertisement

No.
28
Can a schedule be separately set for each air
(*1)
conditioner?
29
What is the billing schedule?
(*1)
30
Can all the indoor units be made stop at a time?
31
Is monitoring the operation state of the outdoor unit
possible?
32
Does setting operation for an air conditioner have any
priority?
33
Is it possible to connect an indoor unit without its remote
controller?
34
Is connection available via VPN?
(*1)
35
What happens if I have inhibited the remote controller
via a Web browser and then a power failure stops the
indoor unit?
(*1) Target model of this description is Smart Manager (SM1280HTLUL) which can be connected to a PC through the Web.
Questions
One air conditioner can register only one master schedule while 32 master
schedules can be created.
An operating schedule can be separately set for each air conditioner.
A day is divided into two time frames: on-hours and off-hours, and power is
distributed to each time frame.
For example, the billing schedule can be used to charge only for the
operation during overtime work hours.
Possible.
In the zone window of a PC, select all floors or all tenants and perform setting
for the stop. (Target model of this description is Smart Manager
(SM1280HTLUL).)
For all the indoor units, set lock interlocking that is activated by the same lock
input.
Apply the external input of all stop to the controller.
Not possible.
The button pressed later receives priority.
Possible.
Available.
If a power failure stops the indoor unit, the remote controller inhibition setting
is canceled.
However, if the remote controller is version 5.27 or later, you can set it to
maintain inhibition of the remote controller, even if there is a power failure that
stops the indoor unit, by turning on 3 of DS25.
Even if you do this setting, the inhibition of the remote controller may be
canceled for a period of time after the power is turned back on.
The version of the remote controller appears on the LCD for a few seconds
after Smart Manager is turned on.
41
Revision 1: Sep. 2012
Answer

Advertisement

Table of Contents
loading

This manual is also suitable for:

Carrier bms-cm1281tlul

Table of Contents