DSL-2750U Wireless N300 ASDL2+ Router with Ethernet WAN Support
User Manual
WAN Remapping
On the Advanced / WAN Remapping page, you can configure the router to connect to a private
Ethernet line.
To use the WAN/LAN port as the WAN port, click the ENABLE button. The port configured as the
WAN port is highlighted in teal.
To use the WAN/LAN port as a LAN port, click the DISABLE button or click the highlighted
WAN/LAN icon.
If you need to use another LAN port as the WAN port, click the icon of the relevant port.
Figure 97. The Advanced / WAN Remapping page.
Page 124 of 173
Configuring via Web-based Interface