DSL-2750U Wireless N300 ASDL2+ Router with Ethernet WAN Support
User Manual
You can specify the following parameters:
Parameter
Enable rule
Name
Action
Protocol
IP version
Figure 112. The page for adding a rule for IP filtering.
General Settings
Move the switch to the right to enable the rule.
Move the switch to the left to disable the rule.
A name for the rule for easier identification. You can specify any
name.
Select an action for the rule.
Allow: Allows packet transmission in accordance with the criteria
specified by the rule.
Deny: Denies packet transmission in accordance with the criteria
specified by the rule.
A protocol for network packet transmission. Select a value from the
drop-down list.
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
Page 141 of 173
Configuring via Web-based Interface
Description