Toshiba IC-R19RH User Manual page 3

Power Cord/Outlet Related
• If the supply cord is damaged, it must be replaced by the manufactur-
hazard.
•
nance or relocation and whenever it is not in use.
• Make sure to insert the power plug steady to the base.
• Remove dust from the plug on a regular period If dust accumulates, it
may cause a fire due to poor insulation.
• Make sure your hands are dry before touching the plug.
• Do not damage the cord, do not bend it forcibly, do not pull it, do not
twist it. Do not bundle and energize, keep away from high tempera-
ture parts, do not put heavy objects on it. Do not pinch, do not
process.
• When heating the liquid, mix it before heating
• Observe the following when stir-frying or grilling.
•
Since a small amount of oil is used, the oil temperature rises sharply and may ignite.
•
Don't leave when cooking.
•
Adjust the heat to a low level and do not overheat.
•This appliance as well as the cooking utensils used and the surface of
the appliance can become very hot, do not touch the hot surface of
the ceramic hob.
•Hold the power plug and pull it out from the outlet. It may cause fire
due to electric shock or short circuit.
•Be careful when handling plugs and cords (Causes of fire, electric
shock, and burns due to short circuit and electric leakage)
•Do not use for anything other than cooking (Cause of ignition due to
overheating / abnormal operation)
•Be careful of splashing oil while cooking fried food. Oil may splatter
and cause burns. Be careful especially with foods that with much
more water.
•That appliances are not intended to be operated by means of an
external timer or separate remote-control system.
3