Advertisement
17. Unplug the plug and shot off the power when replace
parts, maintain and stop using.
18. Keep focus on operation, never during the time when
operator tired, un-concentrate, alcohol and drug effect.
19. Safekeeping when machine is not in using, shut off power,
cleans away chips and lubricates sliding parts.
20. Beware the electric power before electrify, voltage must
be the same with machine indicating. Otherwise, will
make motor and some mechanism serious damaged.
21. Please check that clamping block should be intact, in
order to ensure the safety of operating personnel.
22. Please don't touch the rotating parts, in order to avoid
the area involved in the rotating machine or cut off.
23. The band saw has not been stopped, please don't
remove or place a workpiece, especially the band saw.
24. Never touch or press the lock of main shaft.
25. Do not make any impact on saw blade, during the
working process.
26. Make sure to turn off power when replace band saw.
27. Do not adjust angle of table if
1. length of cutting object is over 300mm.
2. length of band saw is more than 13mm.
11
Advertisement
