Advertisement
4. Machine maintenance
Daily maintenance:
Check the lubricating oil gauge, oil bucket and
the lubricating condition of each activities' parts;
when the oil below the standard should be
added right away. (Refer to the machine
maintenance diagram that indicates the
location)
Every week maintenance:
(1). Check if the coolant is sufficient and the
cooling machine is normal before starting.
(2). Excessive accumulation of iron filings should
be removed.
(3). When work is finished, keep the cleanness of
machine table.
(4). Please check the saw belt wear
circumstances, and replace new one when
the wear serious immediately.
14
Advertisement
