Advertisement
WELDING OPERATING AND PROCEDURE
Welding
Tight
1. WELDING
1. Adjust welding upset force selector to position 0.
2. Grind off blade ends, the cut off blade ends square allow for
correct tooth spacing, clamp the two blade ends, put them in
the center between the two jaws.
3. Adjust the welding upset force selector to the correct position
for the blade width. For every 2m/m blade width increase to
one scale.
4. Press down welding button (use a smooth and steady motion,
not too fast or too slow) until the weld has cooled.
Tempering
Pressurization
adjustment
Tight
Relax
7
Pressurization adjustment method
The width of the saw
blade is as shown in
the diagram
Advertisement
