Table of Contents
Advertisement
Selecting and customizing programs
When you enter a program you have the option of modifying the
settings. If you want to begin without entering new settings just press
the Start key. This will bypass the programming of data and take you
directly to the start of the program. If you want to change the settings
just follow the instructions in the message window. If you start a
program without changing the settings the data from the Set Up
menu will be used.
Manual
The Manual program works as the name implies, manually. This
means that you control the workload yourself, not the computer. To
start the Manual program follow the instructions below or just press
the Manual button then the Enter button and follow the directions in
the message window.
• Press the Manual key then press the Enter key.
• The message window will prompt you to enter the time for the
program. You may enter the time using the Up and Down keys or the
numeric key pad then press the Enter key to accept and proceed to the
next screen.
• The next setting is for the Auto-braking feature. You may turn the
auto-brake on or o then press enter to continue.
• Now you are nished editing the settings and can begin the program
by pressing the start key. You can also go back and modify your
settings by pressing the Enter key. Note: At any time during the
editing of data you can press the Stop key to go back one level, or
screen.
• During the manual program you will be able to scroll through the data
in the message window by pressing the display key. You may also
switch between the pro le or power displays and a quarter mile track
by pressing the display key adjacent to the dot matrix display.
• When the program ends you may press start to begin the same
program again or stop to exit the program, or you can save the
program you just completed as the Facility program by pressing the
Facility key and following the instructions in the message window.
Advertisement
Table of Contents
