Remote Access - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

Remote Access

On the Advanced / Remote access page, you can configure remote access to the web-based
interface of the router. By default, the access from external networks to the router is closed. If you
need to allow access to the router from the external network, create relevant rules.
To create a new rule, click the Add button.
You can specify the following parameters:
Parameter
Name
Interface
IP address
Mask
Protocol
Figure 90. The Advanced / Remote access page.
Figure 91. The page for adding a rule for remote management.
A name for the rule for easier identification. You can specify any
name.
A connection through which the web-based interface of the router is
accessed.
A host or a subnet to which the rule is applied. To choose a device
connected to the router's LAN at the moment, select the relevant
value from the drop-down list located to the right of the field (the
field will be filled in automatically).
The mask of the subnet.
The protocol available for remote management of the router.
Description
Page 103 of 138
Configuring via Web-based Interface