D-Link DSL-2750U User Manual page 38

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Parameter
Enable IGMP Multicast
NAT
Firewall
Click the Next button to continue.
If needed, change the connection settings available in the VLAN section (the page is displayed for
the PPPoE type only).
Parameter
Allow to create several
connections assigned
to this port
Use VLAN
VLAN ID
VLAN priority
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Save button to create the
connection or the Back button to specify other settings.
After clicking the Save button, the quick settings page opens.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Figure 29. Configuring PPPoE WAN connection.
Select the checkbox to allow the router to use several untagged
connections.
Select the checkbox to allow the router to use tagged VLAN
connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
A priority tag for the type of traffic transmitted. The field is
displayed when the Use VLAN checkbox is selected.
Page 38 of 138
Configuring via Web-based Interface
Description
Description