D-Link DSL-2750U User Manual page 78

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Parameter
IP address for checks
Timeout between
connect attempts
Time to try to connect
Timeout for
disconnection
Connection name
Connection quality level
IP address for checks
Timeout between
connect attempts
Time to try to connect
Timeout for
disconnection
When all needed settings are configured, click the Change button.
An IP address that the router will check for availability via ICMP
ping mechanism.
A time period (in seconds) between attempts to establish the main
connection. By default, the value 10 is specified.
A time period (in seconds) for an attempt to establish the main
connection. By default, the value 10 is specified.
A time period (in seconds) for an attempt to break the main
connection. By default, the value 7 is specified.
Reserve connection settings
From the drop-down list, select a WAN connection which will be
used as the reserve one.
The minimum quality of the reserve connection when the router
considers the connection as active. Possible values are from 0 to
255. By default, the value 32 is specified.
An IP address that the router will check for availability via ICMP
ping mechanism.
A time period (in seconds) between attempts to establish the reserve
connection. By default, the value 10 is specified.
A time period (in seconds) for an attempt to establish the reserve
connection. By default, the value 10 is specified.
A time period (in seconds) for an attempt to break the reserve
connection. By default, the value 7 is specified.
Page 78 of 138
Configuring via Web-based Interface
Description