Table of Contents
Advertisement
2.2 Programming
2.2.5
Hunt Pattern Parameters
1.
Click 1.5 Hunt Pattern (for Incoming Calls) in the main menu.
2.
Assign each parameter referring to the descriptions below.
At any time during the session, you can:
•
Click ALL CLEAR to reset all parameters to the default values.
•
Click MENU to return to the main menu (see "2.1 Main Menu for the Administrator").
•
Sort the hunt patterns in the table at the bottom of the screen:
a.
b.
•
Delete the desired hunt pattern from the table at the bottom of the screen:
a.
b.
•
Click LOGOUT to log out from the IP-GW4 Maintenance Utility (see "2.5.2 Log Out").
3.
Click ENTRY.
A maximum of 16 hunt patterns can be created.
4.
Click OK.
You will see a confirmation screen.
Note
If your entry contains an invalid value, you will see an error screen. Click OK and try
again with correct values.
5.
Confirm your entry and click OK.
To return to the previous screen, click CANCEL.
26
Programming Guide
Click the desired sort key and sort order from the Sort Option lists.
Click SORT.
Select the appropriate check box for the hunt pattern you want to delete.
Click DELETE.
Advertisement
Table of Contents
