Table of Contents
Advertisement
2.2 Programming
2.2.8
Initialisation
1.
Click 1.7 Initialization in the main menu.
2.
Click OK to initialise all parameters to the default values.
To abort initialisation, click CANCEL. You will be taken back to the main menu (see "2.1
Main Menu for the Administrator").
Initialisation has to be followed by a reboot to make the default values effective for the
parameters indicated with "#" (e.g., IP address of the VoIP Gateway Card). If not followed
by a reboot, the current setting values will remain effective instead.
3.
Click MENU to return to the main menu (see "2.1 Main Menu for the Administrator").
4.
Refer to "2.5.1 Reboot" and finish the reboot.
Note
If you have forgotten the IP address or log-in password of the VoIP Gateway Card, follow
the procedure detailed in "C1 Initialising the VoIP Gateway Card" of the VoIP Gateway
Card Getting Started to return all settings to the factory default.
38
Programming Guide
Advertisement
Table of Contents
