Polaris RZR XP 4 1000 EPS 2020 Owner's Manual page 154

MAINTENANCE
SUSPENSION SETTINGS
FRONT / REAR SHOCK COMPRESSION ADJUSTMENT
The compression damping clicker knob is located at the top of the shock
reservoir.
1. Turn the clicker clockwise to increase compression damping.
2. Turn the clicker counter-clockwise to decrease compression damping.
Model
All Models with Walker
Evans Shocks
FRONT / REAR SPRING PRELOAD ADJUSTMENT
The factory setting is appropriate for nearly all riding conditions. If desired, the
suspension may be adjusted to maintain vehicle clearance height when carrying
loads.
To adjust the preload, do the following:
1. Elevate the vehicle to allow the suspension to fully extend.
2. Turn the adjusting ring to the left to add preload. Turn the adjusting ring to the
right to remove preload.
Uneven adjustment may cause poor handling of the vehicle, which could result
in an accident. Always adjust both the left and right spring preloads equally or
have your POLARIS dealer or qualified person perform the adjustments.
152
Shock Compression Settings
Location
Front
Rear
WARNING
Clicker Position
8/16 clicks
8/16 clicks