Polaris RZR XP 4 1000 EPS 2020 Owner's Manual page 159

LIGHTS
Headlight and taillight lenses become dirty during normal operation. Clean all
lights frequently to ensure a clear field of vision as well as visibility to other
vehicles.
If an LED headlamp has moisture or fogging inside, disconnect the wiring
harness from the headlamp(s) for a few days to allow the moisture to clear out.
When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil
from your skin leaves a residue, causing a hot spot that will shorten the life of
TAILLIGHT / BRAKE LIGHT REPLACEMENT
The taillight assembly is not serviceable. If the taillight or brake light fails to
operate properly, replace the entire taillight assembly.
HEADLIGHT REPLACEMENT
If a headlight becomes damaged or inoperable, the entire headlight assembly
must be replaced. Do not operate this vehicle at night or in low light conditions
until the headlight is replaced. Always make sure lights are adjusted properly for
best visibility.
TIP
LED LAMPS
TIP
HALOGEN LAMPS
the lamp.
MAINTENANCE
157