Frequently Asked Questions - Philips TAA5608 User Manual

8 Frequently
asked
questions
My Bluetooth headphones do not turn
on.
The battery level is low. Charge the
headphones.
I cannot pair my Bluetooth headphones
with my Bluetooth device.
The Bluetooth is disabled. Enable the
Bluetooth feature on your Bluetooth
device and turn on the Bluetooth device
before you turn on the headphones.
The Bluetooth device cannot �nd the
headphones.
• The headphones may be connected
to a previously paired device. Turn
off the connected device or move it
out of range.
• Pairing may have been reset or the
headphones have been previously
paired with another device. Pair the
headphones with the Bluetooth
device again as described in the user
manual. (see 'Pair the headphones
with your mobile phone' on page 6).
My Bluetooth headphones are
connected to a Bluetooth
stereo-enabled mobile phone, but
music only plays on the mobile phone
speaker.
Refer to the user manual of your mobile
phone. Select to listen to music through
the headphones.
The audio quality is poor and crackling
noise can be heard.
• The Bluetooth device is out of range.
Reduce the distance between your
headphones and Bluetooth device,
or remove obstacles between them.
• Charge your headphones.
The audio quality is poor when
streaming from a mobile phone, is very
slow or streaming does not work at all.
Make sure your mobile phone not only
supports (mono) HFP but also supports
A2DP and is BT4.0x (or higher)
compatible (see 'Technical data' on page
9).
I hear but cannot control music on my
Bluetooth device (e.g. play/pause/skip
forward/backward).
Make sure the Bluetooth audio source
supports AVRCP (see 'Technical data' on
page 9).
The volume level of the headphones is
too low.
Some Bluetooth devices cannot link the
volume level with the headphones
through volume sync. In this case, you
have to adjust the volume on your
Bluetooth device independently to
achieve an appropriate volume level.
I cannot connect the headphones to
another device, what do I do?
• Make sure the Bluetooth function of
the previous paired device is turned
off.
• Repeat the pairing procedure on
your second device (see 'Pair the
headphones with your mobile
phone' on page 6).
EN 13