Table of Contents
Advertisement
3 Get started
App download
Scan the QR code/press 'Download'
button or search 'Philips Headphones' in
the Apple App Store or Google Play to
download the app.
The Philips Headphones App puts you in
charge of the music you are listening to.
You can customize the sound so that
your music and calling experience always
best suit your needs.
Charge the battery
Note
Before you use your headphones, place them in
the charging box and charge the battery for 2
hours for optimum battery capacity and lifetime.
Use only the original USB-C charging cable to
avoid any damage.
Finish your call before charging. Connecting the
earpieces to charge will power them off.
If the headset is not used for a long time, the
rechargeable battery will begin to lose its
charge. To avoid this loss, please fully charge the
battery at least once every three months.
Connect the supplied charging cable to:
• Type C charging slot on the headphones;
• The charger/USB port of a computer.
LED turns white during charging and
turns off when the headphones is
fully charged.
Tip
Normally, a full charge takes 2 hours.
6
EN
Pair the headphones
with your mobile phone
Before you use the headphones with your
mobile phone for the �rst time,
pair it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and mobile
phone. The headphones store the last 4
devices in the memory. If you try to pair
more than 4 devices, the earliest paired
device is replaced by the new one.
1
Make sure that the headphones are
fully charged and turned off.
2
Press and hold
the blue and white LED �ash quickly.
The headphones remain in
pairing mode for 5 minutes.
3
Make sure that the mobile phone is
turned on and its Bluetooth feature is
activated.
4
Pair the headphones with the mobile
phone. For detailed information,
refer to the user manual of your
mobile phone.
The following example shows you how to
pair the headphones with your mobile
phone.
1
Activate the Bluetooth feature of
your mobile phone, select
Philips TAA5608.
2
Enter the headphones' password
"0000" (four zeros) if prompted. For
those devices featuring Bluetooth
3.0 or higher, there is no need to
enter a password.
for 4 seconds until
Philips TAA5608
Advertisement
Table of Contents
