Replacing the microphone
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Connect the microphone and camera cable to the microphone-board.
2
Slide the microphone board into the slot on the display bezel.
3
Follow the procedure from step 1 to step 3 in
4
Route the microphone and camera cable through the routing guides on
the display-assembly base.
5
Connect the microphone and camera cable to the system board.
Post-requisites
1
Replace the
back
2
Replace the
stand
50
computer. After working inside your
cover.
assembly.
After working inside your
"Replacing the
camera".