Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 24-3459 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the display cable through the slot on the display-assembly base.
2 Slide the tabs on the display bezel into the slots on the display-assembly
base.
3 Replace the display-assembly base on the display bezel.
4 Replace the screws that secure the display-assembly base to the display
bezel.
5 Route the optical drive and hard drive cables through the routing guides
on the display-assembly base.

Post-requisites

1 Replace the control-buttons
2 Replace the speakers.
3 Replace the speaker
4 Replace the VESA-mount
5 Replace the system
6 Replace the camera.
7 Replace the microphone.
8 Replace the coin-cell
9 Replace the fan.
10 Replace the heat
11 Replace the wireless
12 Replace the memory
13 Replace the hard
14 Replace the optical
computer. After working inside your
board.
cover.
bracket.
board.
battery.
sink.
card.
module.
drive.
drive.
After working inside your
75