Removing The Rubber Feet; Prerequisites; Procedure - Dell Inspiron 24-3459 Service Manual

Removing the rubber feet

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the
3 Remove the
4 Remove the
5 Remove the
6 Remove the
7 Remove the
8 Remove the fan.
9 Remove the
10 Remove the microphone.
11 Remove the camera.
12 Remove the
13 Remove the
14 Remove the
15 Remove the speakers.
16 Remove the
17 Remove the

Procedure

1 Remove the screws that secure the rubber feet to the display bezel.
stand assembly.
back cover.
optical drive.
hard drive.
memory module.
wireless card.
heat sink.
coin-cell battery.
system board.
VESA-mount bracket.
speaker cover.
control-buttons
display assembly.
computer. After working inside your
After working inside your
board.
77