Table of Contents
Advertisement
Electrical connection
<Program selection 1 to 128>
7-20
PST 6101.321 / PSI 6101.321
The <Program selection> has two meanings:
-
If Start becomes active in connection with the specified program number, the se-
lected program is executed.
-
When the program number (now: stepper no.) is applied:
-
and the <Tip dressed> signal becomes active, the wear and tip dress
counters will be affected for all electrodes (program no. = 0) or for a certain
electrode (program no. = electrode number 1 to 31). The wear counters will
be reset, the tip dress counters will be incremented by 1.
-
and the <Electrode replaced> signal becomes active, the wear and tip
dress counters will be affected for all electrodes (program no. = 0) or for a
certain electrode (program no. = electrode number 1 to 31). The wear and
tip dress counters will be reset to 0.
Parameters for a total of 256 welding programs can be defined for the PSI 6101.321 / PST
6101.321. <Program selection> is e.g. made automatically through communication
with the welding robot or the PLC.
Program selection_1
Program selection_2
Program selection_4
Program selection_8
Program selection_16
Program selection_32
Program selection_64
Program selection_128
Program number
Figure 15: Example Program selection
Selection of the program number will energize the analog pressure output with the pro-
grammed pressure value.
0
1
0
1
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
2
3
1070 080 056-101 (99.09) GB
0
1
0
1
1
1
0
1
0
1
0
1
0
1
0
1
4
255
Advertisement
Table of Contents
