Bosch PST 6101.321 Technical Information page 64

Program selection
+
Start
=
Program schedule
Figure 16: Program selection and counter
1070 080 056-101 (99.09) GB
PST 6101.321 / PSI 6101.321
Influencing the counters via the input signals:
- wear
- tip dress counter
NOTE
If program number 0 (= electrode number 0) is selected with the Program selection si-
gnals and an Electrode replaced signal becomes high, the tip dress and wear counters of
all electrodes are reset.
If a program number (= electrode number 1 to n, n = maximum number of electrodes) is
selected with the Program selection signals and an Electrode replaced signal becomes
high, the tip dress and wear counters of the electrode selected with the signals for Pro-
gram selection are reset.
If program number 0 (= electrode number 0) is selected with the Program selection si-
gnals and a Tip dressed signal becomes high, the tip dress counters of all electrodes will
be incremented and the wear counters will be set to a defined value.
If a program number (= electrode number 1 to n, n = maximum number of electrodes) is
selected with the Program selection signals and a Tip dressed signal becomes high, the
tip dress counter is incremented by 1 and the wear counter is set to a defined value for the
electrode selected by the number of the Program selection signals.
(Program no./Electrode no.)
+
Tip dressed
=
Õ reset
+1
Õ
Electrical connection
+
Electrode replaced
=
- wear Õ 0
- tip dress counter Õ 0
7-21