Motorola APX 7000 User Manual page 80

Press the preprogrammed Bluetooth Inquiry
On/Off button, to enable the Bluetooth Search
feature.
One of the following scenarios occurs:
• If successful, the display shows SRCH ON
followed by SRCH END when the radio is pairing
with a device found. The display shows
<Device Name> PAIRED to indicate pairing is
complete.
• If the feature fails to initiate or the radio fails to
pair with any device, the display shows SRCH
END when the search timer expires without
pairing with any device. Repeat this step.
One of the following scenarios occurs:
• The radio continues to connect to the device. If the
connecting process is successful, the radio
sounds an incremental-pitched tone. The display
shows <Device Type>CONNCTED, and the
Bluetooth icon turns from b to a.
• If the device already has pairing records and the
connecting process fails, the radio sounds a short,
low-pitched tone. The display shows <Device
Type> CON FAIL.
76
English
• If the connection fails within 6 seconds, you hear a
decremental-pitched tone to indicate that the
device is unpaired. The display shows <Device
Type> UNPAIRED.
Turning On Bluetooth Visibility
Turning Bluetooth visibility to on enables other
Bluetooth devices to search for your radio. The
visibility of the Bluetooth is set to off by default.
a) Press and hold the preprogrammed Bluetooth
Inquiry On/ Off button for three seconds to
enable the Bluetooth visibility feature.
One of the following scenarios occurs:
• Keep holding the button although you hear
a short, medium-pitched tone with the
display shows momentary VISIBLE. This
indicates the visibility is turned on
[2]
successfully.
• If the visibility fails to turn on, the display
shows VISIBLTYFAILED.
• When the timer expires, the display shows
VISI OFF.