Motorola APX 7000 User Manual page 81

Receiving Pairing Request from other Devices
Turn on your radio Bluetooth Visible mode.
Your radio automatically accept the request and
pair with any request received from other device.
Turning On the Bluetooth Audio (Routing the Audio
from the Radio to the Headset)
Turning on the Bluetooth audio via the
preprogrammed button:
a) Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the
radio to the headset.
You hear a short, medium-pitched tone. The
display shows HDSET ON.
Turning Off the Bluetooth Audio (Routing the Audio
from the Headset to the Radio)
Turning off the Bluetooth audio via the
preprogrammed button:
a) Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the
headset to the radio.
2
Releasing the preprogrammed button turns off the Visibility mode.
You hear a short, medium-pitched tone. The
display shows SPKR ON.
Adjusting the Volume of the Radio from Bluetooth
Audio Device
Ensure that the Bluetooth audio device is connected
to the radio.
Your radio can only control the volume of MCW and
OCW Bluetooth enabled audio device. If the radio is
paired with other Bluetooth enabled audio device, its
volume is independent from the APX radio. In this
case, the volume is only adjustable on the device.
Adjust volume up/down on the Bluetooth audio
device.
The radio display shows VOL XX and sounds a
short, medium-pitched tone.
Clearing All Bluetooth Devices Information
Clearing all Bluetooth devices information via the
preprogrammed Bluetooth On/Off button:
a) Long press the preprogrammed Bluetooth
On/Off button.
77
English