Use Your Headphones; Bluetooth Device; Connect To Anc(Active Noise Cancelation) - Philips TAPN505BK User Manual

4 Use your
headphone
Connect the headphone
to your Bluetooth device
Turn on your mobile phone/

Bluetooth device.

Press and hold the on/o button to
turn the headphones on.
The blue LED is on 3s.
The headphones are recon-
nected to the last connected
mobile phone/ Bluetooth
device automatically. If the last
one is not available, the
headphones will be in pairing
mode.
Tip
 If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature
after turning on the headphones, you have
to reconnect the headphones and mobile
phone/Bluetooth device manually.
Note
 If the headphones fail to connect to any
Bluetooth device within range in 8 minutes,
it will switch o automatically to save the
battery life when ANC o or in idle mode.
Connect to ANC (active
noise cancelation)
Enable ANC
• Press once ANC button for enable
noise cancelation.
• Press once ANC button for disable
noise cancelation.
Tip
 When the ANC function is not required, switch
o the ANC button to continue your call or
listening to music.
Enable Ambient sound mode
• Press once ANC button to enable
Ambient sound.
• Press once ANC button disable
Ambient sound.
The ANC function will be on/o /
Ambient sound automatically.
Note
 The Ambient sound can be enable only when
ANC is also enabled.
ANC LED indicator status
Headphones status Indicator
ANC is on
ANC is o
Ambient sound
Wired Connection
You can also use the headphones with
the audio cable provided. Make sure
the headphones turned on before using
the audio cable. Connect the supplied
audio cable to the headphones and
external audio device.
Tip
 The function keys will be disabled when
using line-in mode.
The white LED
will turn on.
The white LED will
turn o .
The white LED
ashes slowly