Advertisement
Quick Links
Read the Installation Instructions carefully before installing the product in a correct and safe manner.
Make sure to read the "Safety Cautions" on Page 2 before installation.
● We shall not be held liable for any incident or damage arising out of any installation other than those
described in the Installation Instructions or use of parts other than those specified.
● The actual product may be different from the illustrations and descriptions.
Installation Instructions
Electric Bidet Seat
Model
Contents
1
Safety Cautions
Cautions Before Installation
Part Names and Accessories
2
Installation Steps
Installation of Water Inlet Hose on Shunt
Valve Side
Installation of electric bidet seat
Installation of Water Inlet Hose on Body Side 8
3
Commissioning
4
Troubleshooting
(Household Use)
DL-EH30SE-W
Back Cover
ADL944PZYXC0
Issued August 2022
Page
2
3
4
6
6
7
10
S0822-0
Advertisement
Related Manuals for Panasonic DL-EH30SE-W
Summary of Contents for Panasonic DL-EH30SE-W
- Page 1 Installation Instructions Electric Bidet Seat (Household Use) DL-EH30SE-W Model Contents Page Safety Cautions Cautions Before Installation Part Names and Accessories Installation Steps Installation of Water Inlet Hose on Shunt Valve Side Installation of electric bidet seat Installation of Water Inlet Hose on Body Side 8...
- Page 2 Safety Cautions To prevent any personal hazard or property damage, make sure to follow the instructions below. The hazard or damage caused by misuse can be categorized by the following degrees. WARNING indicates a potential hazardous situation where death or severe injury may be suffered if not avoided.
- Page 3 Cautions Before Installation Note Do not plug the power plug before the bidet body is installed completely. Otherwise, a malfunction may be incurred. When the water remaining inside the body is frozen, move the body to a warm place. Perform installation after the frozen water is thawed out.
- Page 4 Part Names and Accessories Water inlet hose with shunt valve (Length: 950 mm) Power plug Shunt valve Water inlet hose Gasket set Seat (Black gasket *2 , included in the bag for The thickness of the gaskets are consistent with actual products.
- Page 5 [Accessories] Check if there is any missing or lost part. Part name Qty. Verification Water inlet hose with shunt valve Gasket set Thin type: black, 2.5 mm thick ×1 (Included in the bag for Thick type: black, 4 mm thick ×1 Quick fastener (Included in the bag for Top-mounted bolt set...
- Page 6 Installation Steps Installation of Water Inlet Hose on Page 6 Shunt Valve Side Installation of electric bidet seat Page 7 Installation of Water Inlet Hose on Page 8 Body Side Commissioning Page 10 Installation of Water Inlet Hose on Shunt Valve Side Close the water inlet Attach the shunt valve on the water Re-install the water inlet pipe.
- Page 7 Installation of electric bidet seat Body assembly / Remove the installed old seat. Remove the body mounting plate. disassembly button Perform the removal operation by Press the body assembly / disassembly following the Instructions provided button all the way in and remove the by the purchased toilet.
- Page 8 Installation of Water Inlet Hose on Body Side Caution: Serious water leaks may occur if the water inlet hose is installed improperly. About the O-ring Connect to the body Body O-ring connection port 1. As illustrated, insert the O-ring side of the water inlet hose straight into the body connection port.
- Page 9 Make sure to Check if the quick fastener is secured firmly. Pull the water inlet hose gently to check if it will not separated from the body. Open the water inlet valve. Open Once all ports are connected and verified, open the water inlet valve.
- Page 10 When the Electrical Leakage indicator flashes, unplug the power plug immediately and contact your dealer or one of Panasonic-operated service centers. If you touch a closed seat (the Occupancy indicator is on and deodorization operate and unintentionally press the Rear Showering / Front Showering button, water will come out and spray on yourself.
- Page 11 About releasing water Water release outlet The water flowing out next to the nozzle (water release outlet) is the one released for pressure adjustment. This is not a malfunction. If the water release outlet is placed on the surface of the toilet, water may not flow into the toilet. At this time, install the body sightly forward.
- Page 12 →Unplug the power plug. After 5 seconds, plug it back Water When these indicators still flash after removing and inserting the power plug Temperature indicators several times, contact your dealer or one of Panasonic-operated service on the body flash at the same time centers When the product is likely not to be used for more than 1 week, drain it.