Panasonic AV-HS410E Operating Instructions Manual page 39

4. Specifications
Control I/O
Other
Ambient operating
temperature
Humidity
Dimensions
(W  H  D)
Mass
Inrush current, measured according to European standard EN55103-1,
on initial switch-on: 3 A, after a supply interruption of 5 s: 7.5 A
COM Used to control an external device
RS-422 control connector
Communication format (selected using a menu)
p p Mode: 1 (default setting)
Baud rate
Character length : 8 bit
Parity
Stop bit
Flow control
p p Mode: 2
Baud rate
Character length : 8 bit
Parity
Stop bit
Flow control
p p Mode: 3
Baud rate
Character length : 8 bit
Parity
Stop bit
Flow control
TALLY/GPI 1 Input:
TALLY/GPI 2 8 inputs, general-purpose,
photocoupler sensing
Output:
1 9 outputs; selected from R/G tally,
general-purpose
Alarm:
1 output, open collector output
(negative logic)
BOOT switch [SV/NM (service/normal)] (for maintenance purposes)
Normally, this switch is used as the "NM" position.
0 °C to 40 °C
10 % to 90 % (no condensation)
440 mm  158 mm  361 mm
[excluding protrusions]
Approx. 6.2 kg
[excluding accessory parts when no options have been installed]
Approx. 6.6 kg
[excluding accessory parts when all the possible options have been installed]
: 9600 bps
: None
: 1 bit
: None
: 38400 bps
: Odd
: 1 bit
: None
: 38400 bps
: None
: 1 bit
: None
39
D-sub, 9-pin, female
D-sub, 15-pin,
female (2)