Table of Contents
Advertisement
Line distance protection REL670
Version 2.2
Table 58. Four step directional negative phase sequence overcurrent protection NS4PTOC
Function
Operate current, step 1 - 4
Reset ratio
Independent time delay at 0 to 2 x I
step 1 - 4
Minimum operate time for inverse curves,
step 1 - 4
Inverse time characteristics, see table
208, table
209
and table
210
Minimum operate current, step 1 - 4
Relay characteristic angle (RCA)
Operate current for directional release
Minimum polarizing voltage
Real part of negative sequence source
impedance used for current polarization
Imaginary part of negative sequence
source impedance used for current
polarization
Operate time, start non-directional at 0 to
2 x I
set
Reset time, start non-directional at 2 x I
to 0
Operate time, start non-directional at 0 to
10 x I
set
Reset time, start non-directional at 10 x
I
to 0
set
Critical impulse time
Impulse margin time
Transient overreach
94
GUID-E83AD807-8FE0-4244-A50E-86B9AF92469E v7
Range or value
(1-2500)% of lBase
> 95% at (10-2500)% of IBase
,
(0.000-60.000) s
set
(0.000 - 60.000) s
16 curve types
(1.00 - 10000.00)% of IBase
(-180 to 180) degrees
(1–100)% of IBase
(1–100)% of UBase
(0.50-1000.00) W/phase
(0.50–3000.00) W/phase
Min. = 15 ms
Max. = 30 ms
Min. = 15 ms
set
Max. = 30 ms
Min. = 5 ms
Max. = 20 ms
Min. = 20 ms
Max. = 35 ms
10 ms typically at 0 to 2 x I
15 ms typically
<10% at τ = 100 ms
© 2017 - 2022 Hitachi Energy. All rights reserved
Accuracy
at I £ I
±1.0% of I
r
r
±1.0% of I at I > I
r
-
±0.2% or ±35 ms whichever is greater
±0.2% or ±35 ms whichever is greater
See table 208, table
209
±1.0% of I
at I ≤ I
r
r
±1.0% of I at I > I
r
±2.0 degrees
For RCA ±60 degrees:
±2.5% of I
at I ≤ I
r
r
±2.5% of I at I > I
r
±0.5% of U
r
-
-
-
-
-
-
-
set
-
-
1MRK 506 372-BEN Q
and table
210
Hitachi Energy
Advertisement
Table of Contents
