Removal procedure for ThinkBook 13s G2 ARE and ThinkBook 14s G2
ARE
Remove the lower case
Make sure the computer has been shut down before servicing the computer.
Step 1.
Place the computer upside down on a flat surface.
Step 2.
Remove nine screws.
Figure 5. Remove nine screws
Screw specifications
M2 x L4
M2 x L8
Step 3.
Pry up the latches and then remove the lower case.
Figure 6. Pry up the latches and remove the lower case
Go to
https://support.lenovo.com/partslookup
part:
Number of screws
8
1
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
35