Product-Specific Safety Instructions - Bosch Rexroth BODAS DSA/12 Instruction Manual

12/36 BODAS speed sensors | Safety instructions
Bosch Rexroth AG, RE 95290-01-B/2021-09-13
• Do not use defective components or components which are not in a proper working
order. If the sensor fails or demonstrates a faulty operation, it must be replaced.
• Protect the sensor during transport, processing and/or assembly against the
ingress of humidity, paints or other substances into the connector chamber.
• The sensor contains a strong solenoid. As most types of electronic storage
media are sensitive to magnetic fields, they have to be stored separately from
permanent magnets. Persons with implanted cardiac pacemakers must take
special precautions.
• Despite the greatest care being taken when compiling this document, it is
impossible to consider all feasible applications. If information on your specific
application is missing, please contact Bosch Rexroth.
• If other or more specifications apply to the marketing of the product or if there
is marketing outside the specified target markets, you must demand compliance
with the target market-specific regulations from Bosch Rexroth or ensure their
compliance yourself.

2.6 Product-specific safety instructions

The following safety instructions apply to chapters 6 to 14.
System/machine under pressure!
Risk of death or serious injury when working on unsecured machines/systems!
Property damage!
▶ Switch off the relevant machine/system part and secure it against reactivation
according to the parameters by the machine/system manufacturer.
▶ Ensure that all relevant components of the hydraulic system are depressurized.
For this purpose, observe the parameters indicated by the machine/system
manufacturer.
▶ Please note that the hydraulic system might still be pressurized even after
separation from the actual pressure supply.
▶ Do not disconnect any line connections, ports or components as long as the
hydraulic system is under pressure.
WARNING