Identification Of Speed Sensors; Identification Dsa/12 - Bosch Rexroth BODAS DSA/12 Instruction Manual

5.5 Identification of speed sensors

Depending on the scope of the order, there are different identification options.

5.5.1 Identification DSA/12

Order sensor with The product can be identified using the material number (1) on the label of the
installation set packaging unit.
Fig. 14: Material number on sticker DSA/12
The product is to be identified by means of the material number (2) on the
Order sensor only
connector of the sensor.
Fig. 15: Material number on sensor connector DSA/12
The material number on the connector of the sensor differs from the
material number on the packaging unit as the packaging unit consists
of several components.
About this product | BODAS speed sensors
1
RE 95290-01-B/2021-09-13, Bosch Rexroth AG
23/36
2