1. Repair Instruction [Guide -
Training video
youtu.be/Z5oMBH3CSK0
Auto Mode setting
(no.1,4 off no.2,3 on)
Power On
Current version 8.5 (Aug, 2019), and version could be updated
Service Bulletin
Comp S/W
writing]
!
WARNING
Unplug the refrigerator power cord
If the power cord is not unplugged, the Jig and PCB will be
damaged
jig harness to PCB connector CON201
If the mark is Vcc, connect the red
connector
If the mark is Tx, connect the white
connector
Press button
Page 5
Product : Ref
Bulletin # :CNZ201900235-04
Release Date : 2019.10.25
Check in progress