Making The Shield Connection - Hitachi 670 Series Installation Manual

Section 6
Connecting
IEC06000168 V3 EN-US
Figure 31:
PosNo Description
1
2
Table 10:
Connector type
Screw compression type
Terminal blocks suitable for ring lug terminals
6.1.6

Making the shield connection

When using shielded cables, always make sure that the shields are connected according to applicable
engineering methods.
52
2
Accessories
Ferrule
Bridge connector, used to jump terminal points in a connector.
Auxiliary power supply and binary I/O connectors
Because of limitations of space, when ring lug terminal is ordered for Binary I/O connections,
one blank slot is necessary between two adjacent I/O modules. Please refer to the ordering
particulars for details.
© 2017 - 2023 Hitachi Energy. All rights reserved
1
Rated voltage
250 V AC
300 V AC
1MRK514026-UUS Rev. P
M12583-1 v8
Maximum conductor area
2
2.5 mm (AWG14)
2
2 × 1 mm (2 x AWG18)
2
3 mm (AWG14)
M11998-3 v6
670 series
Installation manual