Routing the Wire Harness
Note:
Model No. 31980 and 31981 are equipped with
1 wire harness (i.e., the seat-switch wire harness).
Model No. 31982 is equipped with 2 wire harnesses
(i.e., the seat-switch wire harness and the air-ride-seat
wire harness).
•
Installing the Seat-Switch Wire Harness:
1.
Route the seat-switch harness between the
seat and seat base and towards the machine
wire harness
2.
Install the end of the seat-switch wire
harness labeled P1 (Main Harness) to the
machine-wire-harness end labeled P11 (Seat
Switch).
1. Seat-switch wire harness
•
Installing the Air-Ride-Seat Wire Harness
(Model No. 31982 only):
Install the end of the air-ride-seat wire harness to
the end of the machine wire harness labeled P08
(Opt. Air Ride Seat).
(Figure
2).
Figure 2
2. Machine wire harness
Completing the Installation
1.
Use 4 nuts to secure the seat to the seat base
(Figure
3).
1. Nut
2.
Position the console to the seat bracket (A in
Figure
4).
For Model No. 31900, 31901, 31907, and 31909
machines: Ensure that the throttle cable is
positioned in the seat-bracket gap above the
wire harness (inset of A in
g299317
2
Figure 3
Figure
4).
g299346