Brother AIRScouter WD-360B User Manual page 22

1
Ensure that the AiRScouter is powered off and that the
head display cable is disconnected from the control box
before continuing.
2
Remove the head display cable from the cable channel
on the head band, and from the cable channel on the
flexible arm.
3
Rotate the dial on the ball joint between the flexible arm
and the head band clockwise, until the flexible arm is
separated from the head band.
4
Rotate the dial on the ball joint between the flexible arm
and the head display clockwise, until the flexible arm is
separated from the head display.
22