Brother AIRScouter WD-360B User Manual page 24

8
Attach the flexible arm to the head band by lining up the
wide end of the flexible arm with the threads on the head
band, and rotating the dial on the ball joint clockwise to
tighten.
Note
9
Run the head display cable through the cable channel on
the flexible arm, and then through the cable channel on
the top of the head band. Secure the head display cable
into the clip on the end of the head band, to prevent it
from coming loose during operation.
Note
24
To increase the stiffness of the arm during
operation, you can tighten one or both ball
joints by rotating their respective dials
clockwise.
When attaching the head display cable to the
flexible arm and head band, ensure that you
leave enough slack so that you do not pull the
head display cable during adjustment and
operation.