Brother AIRScouter WD-360B User Manual page 41

 Inserting the Li-ion Rechargeable Battery into
the Control Box
If the Li-ion rechargeable battery was removed, perform
the steps listed above in reverse to insert it again.
 How to charge the Li-ion Rechargeable Battery
The Li-ion rechargeable battery can be charged only by
using the included AC adapter. To charge the battery,
follow these steps:
1
Power off the control box (note that the battery will not
charge while the AiRScouter is in use).
2
Plug the included AC adapter into a compatible electrical
socket.
3
Connect the AC adapter to the AC adapter port on the
control box.
Note
Charging
(Slowly flashing
in orange)
It takes about three hours to fully charge
the Li-ion rechargeable battery when it is
completely discharged.
Fully charged
(Off)
41