Advertisement
This regulation is intended for the warranty of the evaluation board of TOSHIBA CORPORATION DEVICE &
STORAGE CORPORATION ("MHI"). Quality control and specifications are stipulated to ensure safe use of our
evaluation board. Be sure to follow the usage conditions.
Article 1 (Contents of Warranty)
We replace with equivalent new products free of charge if any trouble is caused by manufacturing defects under
the normal use conditions described in the Evaluation Board User's Guide, user's Guidelines, technical documents
or product documentation published on our Web site, delivery specifications, product documentation, attached
labeling, and other notices and similar explanatory documents (hereinafter referred to as "product
manuals/documents" or provided by us and our customers, regardless of how to provide them) on our Web site. The
judgment of manufacturing defects shall be at our discretion.
Article 2 (Warranty Period)
The acceptance period for free replacement shall be 30 days from the date of shipment of such products by the
Distributor.
Article 3 (Reasons for Non-application of Warranty)
Even within the warranty period, failure, damage, or damage due to any of the following causes will not be covered
by the warranty.
1.
Use contrary to the contents of product manuals and documents
2.
When the upper limit of the number of times the flash memory is written is reached, it is caused by wear of
the hardware itself, such as the life due to the charge/discharge characteristics of the capacitor or the
rechargeable battery.
3.
Deterioration that occurred during use of the evaluation board, including discoloration, abrasion, abrasion,
dents, disconnection, and corrosion (except for initial defects at delivery)
4.
Dust, dirt, sand, insects, and other foreign matter mixed in after delivery from us
5.
Due to salt damage
6.
Processing, repair, modification, disassemble, or replacement of parts by anyone other than us
7.
Due to transportation or dropping after delivery
8.
Fire, earthquake, flood, lightning, other natural disasters, pollution, abnormal voltage, and other external
factors or unexpected accidents
9.
Caused by connecting other equipment or parts (excluding optional items specified by us)
10. Problems caused by software
11. Unknown or unintended use or use
12. If any direct or indirect cause of the failure or damage other than the above is recognized to be caused by the
user's use method
Article 4 (Surface Mount after Delivery)
In principle, the product will not be covered by warranty if any processing other than lead component mounting is
performed after it is delivered from us.
© 2023
Toshiba Electronic Devices & Storage Corporation
Assessment board warranty provisions
This is a reference material. Do not design the final equipment in this document.
TCKE8xx series Evaluation Board Instruction Manual
6
2023-5-10
Rev.1.0
Advertisement
