LG A9-LITE Owner's Manual page 22

OPERATION
22
off immediately and remove the foreign objects
or obstructions before resuming use.
• If you hear a noise while mopping, the mop pad
may have dropped off the mop attachment
plate. Turn off the product immediately and
reattach the mop to the attachment plate before
resuming use.
• Do not use a soiled mop pad to clean floors.
• Use only authorized LG Electronics mop pads.
• Empty the dust bin and clean the exhaust filter
and the pre-filter after using the mop nozzle.
Using the Wet Mop Pads
Press the Power button. You can use the only mop
mode and not turn on the dust suction function.
• Press the button to turn on the dust suction
~
function.
• Press the button once while pressing the
!
button once to turn off the dust suction function.
CAUTION
• Do not assemble or disassemble the nozzle while
the appliance is turned on. Doing so may result
in injury.
• Set the water adjustment button to the STOP
position when not using the appliance for an
extended period of time. Failure to do so may
result in product failure.
• Do not let the appliance stand on the floor while
the wet mop pads are attached. Doing so may
result in damage or swelling to wood flooring.
• Do not use on PVC or PU mat for infants or
children. Friction can cause the motor to
overheat.
• If you use the mop nozzle for a long time with the
suction off, the motor may overheat
(recommended duration of use: 80 minutes).
When the moter overheats, the overheating
prevention function is activated and the
appliance is automatically turned off. Use the
appliance after cooling the heat for about one
hour in a cool, well-ventilated place.
Filling the Water Tank
1
Press the PUSH button
tank from the mop nozzle.
2
Open the water inlet cap
water tank and fill the tank with water using
the measuring cup
• Open only one water inlet cap to fill the
water. Opening both caps may cause the
water to flush.
• Do not fill the tank over the MAX line
• Do not put liquid other than water and hot
water in the water tank.
~
3
Close the water inlet cap tightly.
• If the water inlet cap is not closed properly,
water may leak.
to remove the water
a
on the side of the
b
.
c
d
.