6.
Tighten the screws.
7.
Insert the battery pack.
8.
Turn your computer over and connect the AC adapter.
9.
Turn on your computer.
10.
If you see the message Press <F2> to enter Setup, press F2.
11.
In the Exit menu, select Load Setup Defaults; then, press Enter.
12.
When the message Load default configuration now? appears, select Yes; then,
press Enter.
13.
In the Exit menu, select Exit Saving Changes; then, press Enter.
14.
When the message Save configuration changed and exit now? appears, select
Yes; then, press Enter.
15.
Click start – Control Panel.
16.
Click Date, Time, Language, and Regional Options in Category view; then, click
on Change the date and time string.
17.
Set date and time; then, click OK.
18.
Close the Control Panel window.
A-9