Table of Contents
Advertisement
Supporting System Hibernate
If your battery becomes completely discharged during System standby,
you will lose unsaved data and will need to reboot your computer.
Therefore, if you are planning to leave your computer powered by battery
for long periods of time, we recommend System hibernate.
Confirm that System hibernate is supported with the following steps.
1.
In the Power Options Properties dialog box, select Hibernate tab.
2.
Confirm Enable hibernation is checked in Hibernate field.
3.
Click OK, then, close the Control Panel window.
Set Timer to Enter System Standby/Hibernate Automatically
Your computer will enter System standby/hibernate automatically when the specified
time has passed without any operation. To set the time:
1.
In the Power Options Properties dialog box, select Power Schemes tab.
2.
From the pull-down menus in System standby or/and System hibernate, select the
elapsed time before your computer automatically enters System
standby/hibernate.
3.
Click OK, then, close the Control Panel window.
Entering System Standby/Hibernate
Your computer enters System standby/hibernate in each of the following cases:
•
You select Stand By or Hibernate (which replaces Stand By when you press Shift
key) in Turn off computer dialog box. To open the dialog box, click start – Turn
Off Computer.
•
The specified time in System standby or System hibernate in Power Schemes tab of
Power Options Properties dialog box has passed without any operation (See the
previous section).
•
The screen cover is closed.
The above functions if you perform the following:
1.
In the Power Options Properties dialog box, select Advanced tab.
2.
Select Stand by or Hibernate in When I close the lid of my portable
computer.
3.
Click OK , then, close the Control Panel window.
3
3-13
Advertisement
Table of Contents
