Table of Contents
Advertisement
• Note that Power schemes includes other power management settings
• You can set your own Power scheme. Set all power management
• Once the preinstalled Power scheme settings listed on the previous
Using System Standby/Hibernate
System standby/hibernate is a very useful power management tool. For example, you
can restart your computer from stand by mode more quickly than shut down mode.
3
When your computer resumes from System standby/hibernate, the system restores the
exact last state of your computer. On Windows, you can set the conditions under
which the system enters System standby or System hibernate.
•
System standby stores the current condition of your computer in RAM and stops
power supply to all but a few essential components. Your system enters and
resumes from System standby per the conditions mentioned later. In System
standby, the power indicator blinks green. To resume from System standby, operate
your computer again.
•
System hibernate saves the current condition of your computer in part of the hard
disk and turns off your computer. Your system enters and resumes from System
hibernate per the conditions mentioned later. In System hibernate, the power
indicator turns off. To resume from a System hibernate, press the power button.
When entering/resuming from System standby/System hibernate, follow
the instructions below:
• Finish communications, printing, and playing music or video before
• Do not operate your computer or peripheral devices, or
• While operating on battery power that does not have enough power,
• Save the data before your computer enters System standby. If the power
• Select your user account if Windows requires when your computer has
3-12
(such as a timer for System standby, etc.) appearing on Power Schemes
tab. Confirm those settings are set to an appropriate value when you
select the processor performance using power schemes facility.
settings to your suitable ones, and click Save as...; then, type an
appropriate name and click OK.
page are deleted, there is no way but re-installation to resume them.
entering System standby/System hibernate.
connect/disconnect peripheral devices, while entering/resuming from
System standby/System hibernate.
your computer may not resume from System standby/hibernate. In this
case, connect the AC adapter to your computer.
supply to your computer is stopped, the RAM contents will be lost.
resumed from System standby/hibernate.
Advertisement
Table of Contents
