Advertisement
11. Configure the network by setting the name of your computer and workgroup.
To communicate with other wireless enabled computers, set the computer
name and the workgroup name. The computer name should be unique
and the workgroup name should be same as others.
Confirming the Status of the Wireless Connection
Before performing the following instructions, confirm the devices that you want to
communicate with are enabled for wireless LAN.
1.
Click Wireless Network Connection icon (
cannot find the icon click
Network dialog box appears. If Wireless Network Connection Status dialog box
appears, go to Step 4.
2.
Select a network you want to access in Available networks in Connect to
Wireless Network dialog box; then, click Connect button.
• When the network name you want to access does not appear, click
Advanced tab; then, Refresh button of Available networks in Wireless
Network Connection Properties dialog box; then, click OK.
• When the WEP security of the wireless network that you want to
access is enabled, make sure to enter Network key and select Key
format and Key length correctly. (Click Add... button in Wireless
Networks tab of Wireless Network Connection Properties dialog box.)
3.
Click Wireless Network Connection icon (
4.
In Wireless Network Connection Status dialog box, confirm your connection
status.
• When the quality of connection is poor, adjust the distance between the
computer and other devices or the access point you are communicating
with and/or the facing direction of the computer.
• The connection quality is shown the number of green signals (
The more signals light on, the better quality is given to the computer.
or
to show all kinds of icon. Connect to Wireless
) on the taskbar.
) on the taskbar. If you
).
9
Advertisement
