3.
If you still cannot turn off the system with the power switch, press the reset
switch on the bottom of your computer to turn off the system (refer to page
2-3). Ten seconds later, turn on the computer by pressing the power button.
Question: Why does the glide pad malfunction?
•
The surface of the glide pad or your palm may be moist or dirty and grease. Wipe
the glide pad with a soft, dry cloth.
•
Confirm Internal Pointing Device is enabled in Advanced menu of the Setup
Utility.
Trouble with Floppy Disks
Question: Why can't I use a floppy disk?
•
Confirm the floppy disk is inserted correctly.
•
Confirm the drive and file name are correct.
•
The floppy disk may not be formatted or could be corrupted. Format the disk or
use another disk.
•
If you cannot write to a floppy disk, the disk may be write-protected. Eject the
disk and ensure that the write-protect tab covers the detection hole.
•
If you cannot write to a floppy disk, the disk may be full. Use another disk.
Trouble with the Hard Disk
Question: Why can't I read or write data to/from the hard disk?
•
Confirm the drive and file names are correct.
•
Confirm the hard disk has sufficient free space.
Trouble with the CD/DVD
Question: Why does not the drive open?
•
Confirm the computer is turned on.
T-5