Using Ieee1394 Devices - Sharp Actius PC-GP20 Operation Manual

Using IEEE1394 Devices

You can connect the IEEE 1394 devices to the IEEE1394 port on the rear side of the
computer. The IEEE 1394 is a digital interface for handling digital video, digital audio
and other data in two directions between devices, and for controlling other
equipments.
When two or more IEEE 1394 compatible devices are connected to the computer in a
daisy chain, operations and data transactions are possible with not only the equipment
that is directly connected, but also with other devices via the directly connected
device.
• Confirm the IEEE 1394 device you will connect is Windows XP
• Use AC power for the computer and the IEEE 1394 device especially
4
• Some IEEE 1394 devices require that you install drivers before use.
Connecting IEEE 1394 Device
• Attach the provided core to the DV(IEEE1394) cable to insure
• You need not turn off the computer before connecting the device.
• Be sure to read the manuals of the IEEE 1394 device before connecting
1. Attach the provided core to one end of your DV (IEEE1394) cable. Insert the
cable into the core and put the cable around the core; then, close the core until it
clicks.
4-12
compatible.
when reading/writing the data.
compliance with requirements of EMC regulations for computing
equipment.
it to the computer.
Core