Table of Contents
Advertisement
Trouble with Keyboard/Glide Pad
Question: Why doesn't the keyboard or the glide pad function?
•
Follow the steps below:
1.
Press Ctrl+Alt+Delete simultaneously and follow the message on the screen.
2.
If step1 does not work, press the power switch for more than four seconds
to turn off the system. Ten seconds later, turn the computer on.
3.
If you still cannot turn off the system with the power switch, press the reset
switch on the bottom of your computer to turn off the system (refer to Resetting
the System section of Chapter 2). Ten seconds later, turn on the computer by
pressing the power button.
Question: Why does the glide pad malfunction?
•
The surface of the glide pad or your palm may be moist or dirty and grease. Wipe
the glide pad with a soft, dry cloth.
•
Confirm Internal Pointing Device is enabled in Advanced menu of the Setup
Utility.
Trouble with Floppy Disks
Question: Why can't I use a floppy disk?
•
Confirm the floppy disk is inserted correctly.
•
Confirm the drive and file name are correct.
•
The floppy disk may not be formatted or could be corrupted. Format the disk or use
another disk.
•
If you cannot write to a floppy disk, the disk may be write-protected. Eject the disk
and ensure that the write-protect tab covers the detection hole.
•
If you cannot write to a floppy disk, the disk may be full. Use another disk.
Trouble with the Hard Disk
Question: Why can't I read or write data to/from the hard disk?
•
Confirm the drive and file names are correct.
T-5
Advertisement
Table of Contents
