Table of Contents
Advertisement
Switching the Display
1.
In the Display Properties dialog box, select Settings tab; then, click Advanced
button.
2.
Select Utility Manager tab; then, Driver Mode Settings icon.
3.
Select the appropriate mode in Driver mode pull-down menu.
• If your options do not appear in the menu, uncheck the box of Auto.
• When displaying on the LCD monitor:
• When displaying on the external monitor:
• When displaying on both monitors simultaneously:
4.
Click OK; then, follow the instructions shown on the screen.
4
• You can also switch the display with Fn+F5.
• While playing video or animation, you may not be able to switch the
• When displaying on both of the LCD monitor and the external monitor
• To change the resolution and colors, refer to Adjusting the Display of
Displaying the image dividedly on the LCD and an External monitor
To display the image separately on the LCD and the external monitor, use the
Multimonitor function.
1.
Follow the steps 1 and 2 in Switching the Display section.
2.
Select Multimonitor from Driver mode pull-down menu; click OK, then, Yes.
• If your options do not appear in the menu, uncheck the box of Auto.
• To exit the Mmultimonitor mode, select Single or Mirror from the
4-4
Set Driver mode to Single and Primary to LCD.
Set Driver mode to Single and Primary to VGA.
Set Driver mode to Mirror.
display.
simultaneously, the external monitor should be capable for displaying
×
in 1024
768 resolution or more. Otherwise, you may not display
images on the external monitor properly.
Chapter 2.
Driver mode menu.
Advertisement
Table of Contents
