Setup Utility
Advanced Menu
Resolution Expansion defines whether the screen is expanded when it is in a low
resolution. (The setting is not used on Windows.)
Plug&Play O/S normally has to be set to default as "Yes."
Max ACPI C-State determines the amount of power management while the system is
idling. Normally set to default as "C4 State."
Security Menu
Set Supervisor Password defines the supervisor password (up to eight letters,
figures, or the combinations). See the next section about the supervisor password.
Set User Password defines the user password (up to eight letters, figures, or the
combinations). You can set the user password only when the supervisor password has
5
been set.
If you lose your password, you will be unable to access the computer or
change the configuration. Make sure to select a password you will never
forget, or write it down and protect it in a secure place. Otherwise, you
will have to contact your dealer for assistance.
Password On Boot defines whether the system requires the password entry to boot
up.
Hard Disk Boot Sector defines whether the boot sector of the hard disk is write-
protected. When formatting the hard disk or reinstalling software, set it to Normal.
5-4