Sharp Actius PC-MC22 Operation Manual page 143

Why can't I write/delete the data onto/from a disk?
•
Confirm the disk is available in writing or deleting data.
•
If you wish to use the Windows CD writing software, you may need to enable it.
(Refer to Windows Help and Support.)
Why doesn't the DVD video play smoothly?
•
Ensure that the AC adapter is attached to the computer and a power source.
•
Disable system standby and system hibernate.
•
Set the APM button to the max power mode and then, select 100% for the CPU
performance. (See the Using the Advanced Power Management Button section on
page 2-9.)
•
When playing a DVD video, you may experience a picture with irregular motion or
frame dropouts, depending on videos. Enabling the Hardware Decode Acceleration
function of InterVideo WinDVD may solve this problem. Follow these instructions
to enable the function.
1. Quit the playback if it is running.
2. Right-click somewhere in the InterVideo WinDVD5 window and select Setup...
from the pop-up menu. The Setup dialog box will open.
3. Check the box of Use Hardware Decode Acceleration in the Video Hardware
Configuration field.
4. Click OK.
When the Hardware Decode Acceleration function is enabled, the LCD
Optimization function is disabled. (Refer to Help of WinDVD for LCD
Optimization.)
Why isn't the optical drive recognized?/Why can't I find the optical drive
in My Computer window?
•
If your computer is turned on with a DVD disk inserted in the drive, the drive may
not be recognized. In this case, turn off your computer and open the disk tray by
inserting a fine rod into the ejection hole. (Refer to the Why does not the drive
open? section on page T-6.) Remove the disk from the drive, close the optical
drive, and then, turn on your computer again.
•
If you click the Safely Remove Hardware icon (
MATSHITA xxxxx (xxxxx is your optical drive name), the optical drive powers
off. The optical drive icon does not appear in the My Computer window while the
drive is off.
Operation Manual
) on the taskbar and
T-7